MVB-to-X Protocol Converters

HaslerRail has been developing MVB communication technologies for car builders, integrators, and OEMs since TCN technology was introduced. Our MVB-to-X protocol converters enable the network interfaces you need for your communication needs.

Features / Benefits

  • Compact form factor
  • Programmable SoftPLC
  • Expert customer support
  • Worldwide after-sales servies

The compact RiCoGW001 protocol converter is used to interface an Ethernet network with either an MVB or an RS485 network. It supports MVB physical communication in all MVB Classes from 1 to 4, for both ESD and EMD options, including Bus Administration and Message Data.
RiCoGW001 is able to communicate on a UART interface (RS-485) via Modbus RTU.

The RiCoGW001 is delivered with a user-programmable Soft PLC for implementing non-standard gateway features from/to either of the communication interfaces. In addition, the RICoGW001 can be equipped with digital input/output for simple I/O functions The I/O functions can be managed from the SoftPLC.

  • Temperature range : -40°C to +70°C (+85°C 10 min)
  • Protection Index IP20
  • Operating System Linux
  • System services: FTP, WEB interface, SSH, Telnet
  • Ethernet interfaces: 1 x 10/100Mbps
  • Ethernet connector: M12 D-Coded
  • MVB classes from 1 to 4
  • RS-485 serial interface: terminal 6×2 pins
  • Other interfaces : status LEDs
  • Config. address: node terminal 1×6 pins on the front panel
  • Dimensions (WxDxH) 65x110x122
  • Installation: DIN-rail
  • Power supply: 24VDC or 110VDC
  • Power Consumption : < 8W
  • Weight : < 0,7Kg
  • RoHS compliant
  • Conformity : EN50155, EN61373, IEC 61375 , IEC 61131-3
  • Optional 4 isolated digital IN Vin = 24VDC or 110VDC
  • Optional 4 isolated digital OUT Dry Contacts Solid state Relay N.O. 110VDC
Add Your Company