PP 2 Pole Power Pedestal 200A
| Company | L.C. Switchgear |
|---|---|
| Product code | 8800452 |
Images
The Road 630V DC is then fed directly from the Contactor to the Power Pedestal. Two 110V AC control supply is also derived from the respective Contactor panel. The Shore Supply Plug is fitted with a Plug Engaged sensor which inhibits the application of Traction Power to the train unless a magnet in the train receptacle to detected. The Pedestal supplies Traction Power to trains in depot lifting sheds via a Shore Supply Plug. The Shore Supply Plug is stowed in the area underneath the Local Operator Station and the cable is coiled either on the end of a middle road enclosure or on the boom or wall bracket for outer road enclosures. There is a frangible link that disconnects under strain thus preventing damage to the pedestal should the train be moved out of the depot with the plug remaining in the train receptacle. Shore supply status beacons are positioned on top of the Power Pedestal enclosure
Applications:
Combined Assemblies & Frames (CA), Switchgear Enclosures (SE),
Approvals:
LU approved,
Key Features
- IP54
- Protected for internal use
- 60mm Electrical Clearance
- Doors that give access for maintenance are interlocked with the road contactor panel isolator
- The lower left hand section houses the two traction fuses and the supply connection lugs
- The top section houses the contactor, the voltage monitor & fuses, isolation relay and earth leakage CT
- The lower right hand section houses the earth leakage detector and the control equipment
| On / Off load | On Load |
|---|---|
| System Voltage | 630V |
| Rated Voltage | 900V |
| Normal Current | 200A |
| Contactor | Traction grade bar type 2 pole |
| Fuse | Positive and negative traction grade fuses |
| Length | 1050mm |
| Depth | 600mm |
| Height | 1500mm |
| Weight | 200kg |
Other Products From L.C. Switchgear
IBD Isolator & Bonding Device
SD -CRHP Conductor Rail Heating Panel
LVAC Two Panel Modular Switchboard
LVAC Tunnel Lighting Switchboard (50A)
